Description
Low-current high-voltage transmission for heavy commercial discharge.
Pylontech Force-H3 30.72 kWh is a 614.4 V high-voltage LFP storage tower combining an FC1000 master controller with six 5.12 kWh modules, delivering 50 A continuous discharge (up to 30 kW DC throughput) and 29.18 kWh usable energy for commercial manufacturing facilities and off-grid microgrids.
614.4 V Commercial High-Voltage Bus
Direct DC connection to commercial hybrid inverters (GoodWe ET 15–30 kW, Kostal, Sungrow) with peak conversion efficiency.
29.18 kWh Usable Storage Reserve
Deep 95% DoD capacity easily sustains whole-home multi-day heating, cooking, and commercial baselines through extended blackouts.
50 A High-Current Power Delivery (30 kW Max)
Supplies commercial-grade power output to run heavy industrial power tools, compressors, and complete facility sub-panels.
Cable-Free Vertical Column Stacking
Consolidates 30.72 kWh into a single 1.37 m column with internal slide-and-lock busbar mating.
More product details
Delivering 20–30 kW of continuous power from lower-voltage batteries generates extreme current stress and cable heating. Operating at 614.4 V nominal, the Force-H3 30.72 kWh delivers high power with minimal thermal losses.
- 192S series LFP cell string keeps operating temperatures low during sustained 20–30 kW discharge cycles.
- Direct DC coupling eliminates inverter step-up losses, maximizing commercial energy efficiency.
- Deep 95% DoD extracts 29.18 kWh of usable energy across 6,000+ daily cycles.
Pylontech
Compare different models
Scroll sideways to compare every model.
30.72 kWh capacity in an ultra-lean single-column footprint.
Stacking 6 modules vertically reaches a clean 1.37 m column height, preserving valuable workshop and garage floor space while isolating cells from floor moisture. Internal busbar contacts eliminate external high-voltage jumper cables and conduit runs. Integrated master DC circuit breaker isolates the stack automatically in sub-seconds during fault conditions. IP55 rated enclosure certified for unheated basements, technical utility rooms, and sheltered outdoor alcoves (-10 to +50 °C).
Holds 29.17 kWh of working storage
29.17 kWh is the working figure on this six-brick stack. 95 percent depth sets that number. A cycle uses it.
Fits 248 kg on a 540 mm plate
This stack weighs 248 kg assembled. The plate is 540 mm wide. The FC1000 still crowns the 1210 mm rise.
Takes Modbus RTU on the same link
CANBUS and Modbus RTU both leave the FC1000. The hybrid hears one battery. Height does not change the protocol pair.
Technical data
Heavy-duty high-voltage energy storage engineered for commercial workshops, agricultural plants, and microgrids.
614.4 V / 50 A high-rate storage tower delivering 30 kW continuous power.
Six stacked 5.12 kWh FH10050 modules deliver 30.72 kWh of high-voltage LFP storage across a 537.6–691.2 V working window. Engineered for commercial workshops, agricultural processing hubs, and luxury estates, this tower delivers up to 30,000 W of continuous power to run commercial machinery and multi-split heat pumps during outages with zero grid draw.
- Nominal Storage
- 30.72 kWh
- High Operating Voltage
- 614.4 V
- High-Rate Throughput
- 50 A
- All-Weather Build
- IP55
Capacity & Voltage
- Battery module
- 6 x FH10050 (5.12 kWh / 102.4 V each)
- Battery system capacity (kWh)
- 30.72
- Usable capacity (kWh)
- 29.17
- Battery system voltage (VDC)
- 614.4
Current & Comms
- Charge / discharge current, normal (A)
- 50
- Charge / discharge current, max (A)
- 55@15MIN
- Communication port
- Modbus RTU / CAN
- Multi-group
- Max 6 groups in parallel
Mechanical & Environment
- Dimension (W x D x H mm)
- 540 x 350 x 1210
- Weight (kg)
- 248
- IP rating
- IP65
- Working temperature, charge (C)
- -10 ~ 55
- Storage temperature (C)
- -20 ~ 45
- Humidity (RH)
- 5% ~ 95%, no condensation
- Altitude (m)
- <4,000
Performance
- Depth of discharge
- 95%
- Design life (@25 C)
- 15+ years
- Cycle life (@25 C)
- >8,000
Project fit
Where this model fits.
Scenarios that show which projects the Pylontech Force-H3 30.72 kWh (6 x FH10050) belongs in, what to verify before quoting, and when another model is the better pick.
Commercial Manufacturing & Agricultural Facilities (25–35 kWp Solar Arrays)
Properties running multi-zone heat pumps, commercial tools, or EV chargers requiring up to 30 kW continuous discharge power from storage.
50 A throughput delivers full 30 kW power, while 29.18 kWh usable capacity provides the depth needed to sustain operations overnight.
- BoundaryIf the facility requires maximum single-tower capacity (35.84 kWh / 34.05 kWh usable) to cover multi-day winter heating or multi-shift operations, step up to the 35.84 kWh (7-module flagship). ---
- If the facility requires maximum single-tower capacity (35.84 kWh / 34.05 kWh usable) to cover multi-day winter heating or multi-shift operations, step up to the 35.84 kWh (7-module flagship). ---
Documents
Pylontech Force-H3 datasheet (EN-SD-250519, EN)Product questions
What is the total assembled height and weight of the 6-module tower?
1,370 mm height; approx. 263.0 kg total weight. * Total Dimensions: 580 mm wide × 380 mm deep × 1,370 mm high. * Total Weight: approx. 263.0 kg (including FC1000 top controller and base). * Structural Requirement: Secure the included top wall-mounting bracket into solid masonry for seismic stability.
System components
Required components
Pylontech FC1000
Item number: DLK-PYLONTECH-FC1000
Force-H3 modules stack behind this controller/BMS master, the string does not run without it.
Chint DTSU666 smart meter
Item number: DLK-CHINT-DTSU666
grid-side meter typically required by the paired hybrid inverter for export limiting.
Recommended components
MBS KBU58 600/5A CT
Item number: DLK-MBS-KBU58-600-5A
sized CT for the DTSU666 meter; choose the KBU58 amperage that matches the site's actual service current, not the battery current.
Optional components
Pylontech FH10050 module
Item number: DLK-PYLONTECH-FH10050
add modules (2-7 per controller, up to 6 parallel groups) to grow capacity within the same string architecture.
Approved pairings
GoodWe GW10K-BTItem number DLK-GOODWE-GW10KBTGoodWe's list, 2026-04-14, puts Force-H3 in the BT column, at ARM 14 or higher.
GoodWe GW5K-BTItem number DLK-GOODWE-GW5KBTGoodWe's list, 2026-04-14, puts Force-H3 in the BT column, at ARM 14 or higher.
GoodWe GW8K-BTItem number DLK-GOODWE-GW8KBTGoodWe's list, 2026-04-14, puts Force-H3 in the BT column, at ARM 14 or higher.
GoodWe GW15K-ETItem number DLK-GOODWE-GW15KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW20K-ETItem number DLK-GOODWE-GW20KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe Lynx D 20 kWh + GW20K-ETItem number DLK-GOODWE-LYNXD20KWHGW20KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW25K-ETItem number DLK-GOODWE-GW25KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe Lynx D 25 kWh + GW25K-ETItem number DLK-GOODWE-LYNXD25KWHGW25KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW29.9K-ETItem number DLK-GOODWE-GW299KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW30K-ETItem number DLK-GOODWE-GW30KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW40K-ET-10Item number DLK-GOODWE-GW40KET10Pylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW50K-ET-10Item number DLK-GOODWE-GW50KET10Pylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW10K-ETItem number DLK-GOODWE-GW10KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
GoodWe GW5K-ETItem number DLK-GOODWE-GW5KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
GoodWe GW6.5K-ETItem number DLK-GOODWE-GW65KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
GoodWe GW8K-ETItem number DLK-GOODWE-GW8KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
Pylontech Force H3X FH3X-10K-HY-3P (10 kW three-phase all-in-one)Item number DLK-PYLONTECH-FH3X10KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X 12 kW three-phase hybridItem number DLK-PYLONTECH-FH3X12KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X 15 kW three-phase hybridItem number DLK-PYLONTECH-FH3X15KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X FH3X-6K-HY-1PItem number DLK-PYLONTECH-FH3X6KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X 8 kW three-phase hybridItem number DLK-PYLONTECH-FH3X8KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.