Description
10 kW continuous discharge from a compact 2-module stack.
Pylontech Force-H3 10.24 kWh is a compact 204.8 V high-current LFP storage starting tower combining an FC1000 master controller with two 5.12 kWh modules, delivering 50 A continuous discharge (10 kW output) for modern three-phase hybrid inverters with vertical expansion headroom up to 35.84 kWh.
50 A High-Current Power Delivery (10 kW)
Supplies full-speed battery discharge from just 2 modules, powering domestic heat pumps and high-draw domestic loads.
204.8 V Direct High-Voltage Bus
Directly satisfies the starting voltage floors of three-phase hybrid inverters (GoodWe ET, SMA, Sungrow) with peak conversion efficiency.
Cable-Free Direct Column Stacking
Internal self-aligning busbar terminals eliminate exposed high-voltage DC wiring and inter-module cabling errors.
Massive Expansion Headroom (Up to 35.84 kWh)
Add up to 5 additional FH10050 bricks on top of this exact stack as household energy demands grow.
More product details
Standard residential batteries limit current to 25 A or 30 A, requiring 4 or 5 modules to deliver 10 kW of power. The Force-H3 uses 50 Ah automotive-grade cells to deliver 50 A continuous current from just 2 modules.
- 64S series LFP cell string provides 204.8 V nominal, placing inverter DC-DC converters in their lowest-loss operating zone.
- Delivers up to 10.0 kW continuous power throughput at 50 A to easily run domestic appliances during evening peaks.
- Deep 95% DoD extracts 9.69 kWh of usable energy across 6,000+ daily cycles.
Pylontech
Compare different models
Scroll sideways to compare every model.
Low-profile column with multi-year expansion headroom.
Standing on its heavy-duty base pedestal, this 2-module tower delivers extreme energy density while leaving vertical headroom to add up to 5 additional modules later. Internal busbar contacts eliminate external high-voltage jumper cables and conduit runs. Expandable up to 7 modules (35.84 kWh) by simply stacking additional FH10050 bricks on top. IP55 weatherproof enclosure certified for unheated basements, technical utility rooms, and sheltered outdoor alcoves (-10 to +50 °C).
Holds 9.69 kWh of working storage
95 percent depth opens 9.69 kWh on this short stack. That is the working figure each cycle.
Fits a 540 by 350 mm floor plate
The floor plate is 540 by 350 mm. Height is 530 mm. Weight is 92 kg on the base.
Takes a later FH10050 on the same head
The FC1000 stays. Each added brick climbs the string toward seven.
Technical data
The high-power residential storage tier engineered for all-electric households with heat pumps.
204.8 V / 50 A high-rate storage starting tower with 95% depth of discharge.
Combining an FC1000 master controller with two 5.12 kWh FH10050 modules, this 10.24 kWh high-voltage battery tower provides reliable 204.8 V storage in an ultra-compact footprint. Designed for electrified residential homes, it supports up to 50 A continuous charge/discharge (delivering up to 10 kW DC power) and expands effortlessly up to 35.84 kWh without replacing the master base.
- Nominal Storage
- 10.24 kWh
- High-Voltage Bus
- 204.8 V
- High-Rate Throughput
- 50 A
- All-Weather Build
- IP55
Capacity & Voltage
- Battery module
- 2 x FH10050 (5.12 kWh / 102.4 V each)
- Battery system capacity (kWh)
- 10.24
- Usable capacity (kWh)
- 9.69
- Battery system voltage (VDC)
- 204.8
Current & Comms
- Charge / discharge current, normal (A)
- 50
- Charge / discharge current, max (A)
- 55@15MIN
- Communication port
- Modbus RTU / CAN
- Multi-group
- Max 6 groups in parallel
Mechanical & Environment
- Dimension (W x D x H mm)
- 540 x 350 x 530
- Weight (kg)
- 92
- IP rating
- IP65
- Working temperature, charge (C)
- -10 ~ 55
- Storage temperature (C)
- -20 ~ 45
- Humidity (RH)
- 5% ~ 95%, no condensation
- Altitude (m)
- <4,000
Performance
- Depth of discharge
- 95%
- Design life (@25 C)
- 15+ years
- Cycle life (@25 C)
- >8,000
Project fit
Where this model fits.
Scenarios that show which projects the Pylontech Force-H3 10.24 kWh (2 x FH10050) belongs in, what to verify before quoting, and when another model is the better pick.
Standard Electrified Single-Family Homes (8–10 kWp Solar Arrays)
Homes with 3-phase heat pumps and 8–10 kWp solar needing 10 kW continuous battery power to handle evening kitchen and HVAC loads.
50 A discharge delivers full 10 kW power from just 2 modules, while 9.69 kWh usable capacity buffers daytime solar overproduction.
- BoundaryIf the household requires deeper overnight capacity (> 14 kWh) for multi-day winter heating buffers, step up to the 15.36 kWh (3-module) or 20.48 kWh (4-module) tower. ---
- If the household requires deeper overnight capacity (> 14 kWh) for multi-day winter heating buffers, step up to the 15.36 kWh (3-module) or 20.48 kWh (4-module) tower. ---
Documents
Pylontech Force-H3 datasheet (EN-SD-250519, EN)Product questions
What inverters are natively compatible with this 10.24 kWh Force-H3 tower?
GoodWe ET (5–10 kW), SMA Sunny Tripower Smart Energy, Kostal PLENTICORE, Sungrow SH series. Per Pylontech's compatibility matrix (Ver. 2.40), the Force-H3 series with FC1000 controller is certified for native CAN communication with GoodWe ET, SMA Smart Energy, Kostal PLENTICORE, and Sungrow three-phase hybrid inverters.
What is the total assembled height and weight of the 2-module tower?
570 mm height; approx. 95.0 kg total weight. * Total Dimensions: 580 mm wide × 380 mm deep × 570 mm high. * Total Weight: approx. 95.0 kg (including FC1000 top controller and base).
System components
Required components
Pylontech FC1000
Item number: DLK-PYLONTECH-FC1000
Force-H3 modules stack behind this controller/BMS master, the string does not run without it.
Chint DTSU666 smart meter
Item number: DLK-CHINT-DTSU666
grid-side meter typically required by the paired hybrid inverter for export limiting.
Recommended components
MBS KBU58 600/5A CT
Item number: DLK-MBS-KBU58-600-5A
sized CT for the DTSU666 meter; choose the KBU58 amperage that matches the site's actual service current, not the battery current.
Optional components
Pylontech FH10050 module
Item number: DLK-PYLONTECH-FH10050
add modules (2-7 per controller, up to 6 parallel groups) to grow capacity within the same string architecture.
Approved pairings
GoodWe GW10K-BTItem number DLK-GOODWE-GW10KBTGoodWe's list, 2026-04-14, puts Force-H3 in the BT column, at ARM 14 or higher.
GoodWe GW5K-BTItem number DLK-GOODWE-GW5KBTGoodWe's list, 2026-04-14, puts Force-H3 in the BT column, at ARM 14 or higher.
GoodWe GW8K-BTItem number DLK-GOODWE-GW8KBTGoodWe's list, 2026-04-14, puts Force-H3 in the BT column, at ARM 14 or higher.
GoodWe GW15K-ETItem number DLK-GOODWE-GW15KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW20K-ETItem number DLK-GOODWE-GW20KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe Lynx D 20 kWh + GW20K-ETItem number DLK-GOODWE-LYNXD20KWHGW20KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW25K-ETItem number DLK-GOODWE-GW25KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe Lynx D 25 kWh + GW25K-ETItem number DLK-GOODWE-LYNXD25KWHGW25KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW29.9K-ETItem number DLK-GOODWE-GW299KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW30K-ETItem number DLK-GOODWE-GW30KETPylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules, and footnote e restricts this inverter to Force-H3 or Powercube-M1C. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW40K-ET-10Item number DLK-GOODWE-GW40KET10Pylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW50K-ET-10Item number DLK-GOODWE-GW50KET10Pylontech Ver. 2.43 lists a Force-H3 stack of 3 to 7 modules. Our Force-H3 10.24 kWh is 2 modules and is below the minimum.
GoodWe GW10K-ETItem number DLK-GOODWE-GW10KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
GoodWe GW5K-ETItem number DLK-GOODWE-GW5KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
GoodWe GW6.5K-ETItem number DLK-GOODWE-GW65KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
GoodWe GW8K-ETItem number DLK-GOODWE-GW8KETPylontech Ver. 2.43 lists a Force-H3 stack of 2 to 5 modules. Our Force-H3 30.72 kWh (6 modules) and 35.84 kWh (7 modules) are above that maximum.
Pylontech Force H3X FH3X-10K-HY-3P (10 kW three-phase all-in-one)Item number DLK-PYLONTECH-FH3X10KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X 12 kW three-phase hybridItem number DLK-PYLONTECH-FH3X12KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X 15 kW three-phase hybridItem number DLK-PYLONTECH-FH3X15KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X FH3X-6K-HY-1PItem number DLK-PYLONTECH-FH3X6KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.
Pylontech Force H3X 8 kW three-phase hybridItem number DLK-PYLONTECH-FH3X8KHY3PThe FH10050 module is the ONLY battery either document names. Power derates hard at one module: charge and discharge fall to 2.5 kW, so a single-module design is electrically valid but commercially poor.