GoodWe Lynx Home F 6.55 kWh (PCU base + 2 x LX F3.3-H)
Description
Internal self-aligning busbars for fast, error-free assembly.
GoodWe LX F3.3-H is a 3.27 kWh high-voltage lithium iron phosphate (LFP) battery module with internal plug-and-play busbars, engineered to expand GoodWe Lynx Home F storage towers from 6.55 kWh up to 16.38 kWh.
Cable-Free Vertical Stacking
Internal mating connectors pass high-voltage power and communication directly between modules without external cables.
102.4 V High-Voltage Stepping
Adds 102.4 V nominal per module to place hybrid inverters in their highest DC-DC conversion efficiency window.
Thermal-Resistant LFP Chemistry
Cobalt-free lithium iron phosphate cells deliver long-term cyclic safety and stability from -20 °C to +50 °C.
Manageable 43 kg Unit Weight
Sized and balanced for clean two-person installation in compact residential utility rooms and basements.
More product details
Traditional high-voltage battery modules require external DC cable jumpers, flexible conduits, and communication patch leads between every layer. The LX F3.3-H passes power and CAN lines internally through heavy-duty mating terminals.
- Self-aligning guide pins ensure perfect mechanical seating and electrical contact upon vertical placement.
- Eliminates exposed high-voltage DC wiring, reducing fire and accidental contact hazards inside residential spaces.
- Reduces on-site battery stack assembly time to under 15 minutes for a complete 3-module column.
GoodWe Lynx Home F
Compare different models
Scroll sideways to compare every model.
4 models
Usable energy
—
13.10 kWh
16.38 kWh
—
Nominal energy
3.27 kWh
3.27 kWh
3.27 kWh
—
Nominal voltage
102.4 V
409.6 V
512.0 V
—
Cell chemistry
LFP (LiFePO4)
LFP (LiFePO4)
LFP (LiFePO4)
—
Max. charge current
—
25 A
25 A
—
Max. discharge current
—
25 A
25 A
—
Ingress protection
IP55
IP55
IP55
—
Weight
—
201 kg
244 kg
—
High thermal stability with integrated sub-BMS cell balancing.
Built with automotive-grade prismatic LFP cells in a 32S series configuration, each module features integrated sub-BMS electronics that report cell temperatures and voltages continuously to the master PCU base. Cell-level thermal sensors and active balancing prevent localized cell degradation across thousands of daily cycles. Wide operating temperature range: charging from 0 °C to +50 °C, discharging down to -20 °C. IP55 sealed enclosure protects cell groups against atmospheric condensation in unconditioned basements.
3.27 kWh per step, four steps in all
Two modules to five on one PCU: 6.55, 9.83, 13.10, 16.38 kWh. Every step is the same part - BMD0033-01-00P, twelve to a pallet - so an extension is a repeat order rather than a new configuration.
The finished tower keeps its IP55 rating
Stacking a module opens no new weather path: the assembled tower stays IP55, and the added cells keep the same operating window as the ones already in the stack.
Supervision stays with the PCU
The module carries the energy; the master BMS in the PCU goes on managing the whole stack and talking CAN to the GoodWe inverter. Nothing about the pairing has to be set up again.
Technical data
The fundamental high-voltage building block for GoodWe Lynx Home F residential storage.
3.27 kWh modular expansion brick with internal plug-and-play busbars.
Serving as the modular expansion unit for Lynx Home F systems, the LX F3.3-H adds 3.27 kWh of nominal storage and 102.4 V nominal bus voltage per layer. Its internal push-in connectors mate automatically as modules stack vertically, completely eliminating external inter-module high-voltage DC cables, crimping tools, and wiring connection mistakes.
- Nominal Capacity
- 3.27 kWh
- High-Voltage Bus
- 102.4 V
- Continuous Current
- 25 A
- External DC Jumpers
- Zero
General data
- Configuration
- Battery module, 1 of 2-5 per tower
- Usable energy
- 3.27 kWh
- Nominal voltage
- 102.4 V
- Cell chemistry
- LFP (LiFePO4)
- Manufacturer part number
- BMD0033-01-00P
- Packaging (VPE)
- 12 per pallet
Tower & environmental data
- Minimum modules per tower
- 2
- Maximum modules per tower
- 5
- Tower energy range
- 6.6–16.4 kWh
- Operating voltage by tower
- 182.4–230.4 / 273.6–345.6 / 364.8–460.8 / 456.0–576.0 V
- Operating temperature
- Charge 0 to +50 °C; discharge -20 to +50 °C
- Ingress protection
- IP55
- BMS communication
- CAN
- Safety standards
- IEC 62619, IEC 62040, CEC
- Transport certification
- UN38.3
Project fit
Where this model fits.
Scenarios that show which projects the GoodWe LX F3.3-H (Lynx Home F battery module, 3.27 kWh) belongs in, what to verify before quoting, and when another model is the better pick.
Project scenario
Modular Capacity Expansion on an Existing Lynx Home F Tower
Homeowners who initially installed a 2-module (6.55 kWh) or 3-module (9.83 kWh) Lynx Home F tower and now wish to increase storage capacity due to adding an EV or heat pump.
Order 1 or 2 individual LX F3.3-H bricks, unclip the top cover, place the new modules directly onto the stack, and re-anchor. The PCU base auto-recognizes the new capacity upon reboot.
What Linker confirms with you
- Confirm this model against the adjacent rating in the same family
Project scenario
Granular System Sizing for New Residential Projects
Sizing high-voltage battery capacity to precisely match solar array yield (e.g., 2 bricks for 5–7 kWp solar, 3 bricks for 8–10 kWp solar, 4–5 bricks for 12–16 kWp solar).
Sizing storage in 3.27 kWh increments avoids paying for unneeded excess capacity on small roofs while allowing larger homes to scale voltage and kWh together.
What Linker confirms with you
- Confirm this model against the adjacent rating in the same family
Documents
GoodWe Lynx Home F Series (HV) Datasheet (EMEA, EN)Product questions
Can I install a single LX F3.3-H module as a standalone 3.27 kWh battery?
No. Minimum 2 modules (6.55 kWh) are required. A single LX F3.3-H module operates at 102.4 V nominal (91.2–115.2 V operating). GoodWe ET and BT three-phase hybrid inverters have a minimum battery starting voltage floor of 180 V DC. A minimum of 2 modules in series (204.8 V nominal) is required to establish a compliant high-voltage DC bus.
What is the procedure for adding a new module to an older, existing battery stack?
Charge/discharge existing stack to ~30–50% SoC before adding the new brick. When expanding an existing Lynx Home F tower: 1. Turn off the inverter and open the master DC isolator on the PCU base. 2. Ensure the state of charge (SoC) of the existing stack is close to the storage voltage of the new factory module (~30% to 50% SoC) to minimize initial cell balancing time. 3. Stack the new LX F3.3-H module onto the column, re-secure side locking brackets, and power on. The PCU automatically registers the added capacity.
What are the physical dimensions and weight of each module for handling?
43.0 kg per module; 600 × 380 × 155 mm. Each brick weighs 43 kg (approx. 95 lbs) and measures 600 mm wide, 380 mm deep, and 155 mm high. It features integrated side carrying handles and is designed for a safe two-person lift during indoor residential installations.
Approved pairings
GoodWe GW10K-BTItem number DLK-GOODWE-GW10KBTGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW5K-BTItem number DLK-GOODWE-GW5KBTGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW8K-BTItem number DLK-GOODWE-GW8KBTGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW15K-ETItem number DLK-GOODWE-GW15KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW20K-ETItem number DLK-GOODWE-GW20KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe Lynx D 20 kWh + GW20K-ETItem number DLK-GOODWE-LYNXD20KWHGW20KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW25K-ETItem number DLK-GOODWE-GW25KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe Lynx D 25 kWh + GW25K-ETItem number DLK-GOODWE-LYNXD25KWHGW25KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW29.9K-ETItem number DLK-GOODWE-GW299KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW30K-ETItem number DLK-GOODWE-GW30KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW10K-ETItem number DLK-GOODWE-GW10KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW5K-ETItem number DLK-GOODWE-GW5KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW6.5K-ETItem number DLK-GOODWE-GW65KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW8K-ETItem number DLK-GOODWE-GW8KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
