GoodWe GW10K-ET
Description
Low-current high-voltage transmission for heavy winter discharge.
GoodWe Lynx Home F 13.10 kWh is a 4-module high-voltage battery tower delivering 409.6 V nominal bus voltage, engineered to power domestic heat pump heating buffers and sustain whole-home overnight autonomy.
409.6 V High-Voltage Bus for Low Cable Stress
Higher string voltage reduces resistive heat dissipation during sustained high-load winter heating cycles.
11.80 kWh Usable Storage Reserve
Supplies ample energy to power variable-speed heat pumps and domestic baselines through cold winter nights.
1.01 m Slim Floor Column (0.23 m²)
Consolidates 13.10 kWh into a neat, vertical stack without sacrificing garage or utility room floor space.
Cable-Free Modular Assembly
Internal self-aligning busbars connect power and communication lines automatically with zero external high-voltage wiring.
More product details
Delivering 6–8 kW of continuous power from low-voltage batteries generates extreme current stress ($>150\text{ A}$) and cable heating. Operating at 409.6 V nominal, the Lynx Home F 13.10 kWh delivers the same power at just 15–20 A.
- 128S series LFP cell string keeps operating temperatures low during sustained 6–10 kW discharge cycles.
- Direct DC coupling eliminates inverter step-up losses, maximizing seasonal heat pump COP (coefficient of performance).
- Cell-level active balancing maintains uniform state-of-charge across all 4 stacked modules.
GoodWe Lynx Home F
Compare different models
Scroll sideways to compare every model.
4 models
Usable energy
13.10 kWh
9.83 kWh
16.38 kWh
—
Nominal energy
3.27 kWh
3.27 kWh
3.27 kWh
3.27 kWh
Nominal voltage
409.6 V
307.2 V
512.0 V
102.4 V
Cell chemistry
LFP (LiFePO4)
LFP (LiFePO4)
LFP (LiFePO4)
LFP (LiFePO4)
Max. charge current
25 A
25 A
25 A
—
Max. discharge current
25 A
25 A
25 A
—
Ingress protection
IP55
IP55
IP55
IP55
Weight
201 kg
158 kg
244 kg
—
13 kWh capacity in an ultra-lean 0.23 m² floor footprint.
Stacking 4 modules vertically reaches a clean 1.01 m column height, preserving valuable workshop and garage floor space while isolating cells from floor moisture. Internal busbar contacts eliminate external high-voltage jumper cables and conduit runs. Integrated master DC circuit breaker isolates the stack automatically in sub-seconds during fault conditions. IP55 rated enclosure certified for unheated basements, technical utility rooms, and sheltered outdoor alcoves (-20 to +50 °C).
After the fifth module, growth goes sideways
One tower ends at five modules. GoodWe's Lynx F manual documents up to eight towers in parallel, each on its own PCU base, so a site that outgrows 16.38 kWh gains a second tower beside the first rather than a taller one.
Height is the only thing that grew
935 mm assembled on the grounded base, on the same 600 x 380 mm footprint as the two-module tower. The floor carries the 201 kg; what wants planning is the route into the room and the clearance above.
Diagnosis runs through the inverter
The tower reports as one 409.6 V battery over CAN, so the master BMS's view of all four modules reaches the hybrid on a single line. Service questions get answered remotely, and a fifth module later simply raises the count.
Technical data
The robust residential storage tier engineered for all-electric households with active heating buffers.
409.6 V high-voltage battery storage sized for overnight heat pump operation.
Four stacked LFP modules deliver 13.10 kWh of nominal storage across a high-voltage 364.8–460.8 V working window. By elevating DC bus voltage past 400 V, this tower minimizes internal current stress and transmission heat during continuous heavy discharges, easily powering residential heat pumps and domestic appliances through long winter evenings.
- Nominal Storage
- 13.10 kWh
- High Operating Voltage
- 409.6 V
- Continuous Current
- 25 A
- Stable Column Height
- 1.01 m
Energy & Electrical
- Usable energy
- 13.10 kWh
- Nominal voltage
- 409.6 V
- Operating voltage range
- 364.8 ~ 460.8 V
- Nominal power
- 10.24 kW
- Cell chemistry
- LFP (LiFePO4)
- Battery module nominal energy
- 3.27 kWh
- Battery module nominal voltage
- 102.4 V
- Battery modules per tower
- 4
- Nominal charge / discharge current
- 25 A
- Battery module
- LX F3.3-H, 3.27 kWh, 102.4 V
Environment
- Ingress protection
- IP55
- Operating temperature
- Charge: 0 ~ +50; Discharge: -20 ~ +50 °C
- Relative humidity
- 0 - 95%
- Maximum operating altitude (m)
- 2000
Mechanical & Communications
- Dimensions (W × H × D)
- 600 × 935 × 380 mm
- Weight
- 201 kg
- Communication
- CAN
Compliance
- Safety
- IEC62619, IEC62040, CEC
- EMC
- CE, RCM
- Transport
- UN38.3
Mechanical & Comms
- Mounting method
- Floor, grounded
Project fit
Where this model fits.
Scenarios that show which projects the GoodWe Lynx Home F 13.10 kWh (PCU base + 4 x LX F3.3-H) belongs in, what to verify before quoting, and when another model is the better pick.
Project scenario
Electrified Residences with Heat Pumps (10–14 kWp Solar Arrays)
Single-family homes in temperate or cold climates using heat pumps for space heating and hot water, consuming 10–15 kWh overnight during winter months.
11.80 kWh usable capacity provides the depth needed to sustain continuous compressor cycling and domestic baselines from 5 PM to 8 AM without grid purchases.
- BoundaryIf the home features a geothermal heat pump, a sauna, or an EV charging overnight, step up to the 16.38 kWh (5-module) flagship tower to maximize self-consumption.
What Linker confirms with you
- If the home features a geothermal heat pump, a sauna, or an EV charging overnight, step up to the 16.38 kWh (5-module) flagship tower to maximize self-consumption.
Project scenario
Single-Column Ceiling Constraint with High Storage Demands
Homes demanding >10 kWh of storage where utility room walls cannot accommodate multiple side-by-side battery cabinets.
Consolidates over 13 kWh into a single 600 × 380 mm footprint, standing just over 1 meter tall to fit neatly beneath standard wall-mounted inverters.
What Linker confirms with you
- Confirm this model against the adjacent rating in the same family
Documents
GoodWe Lynx Home F Series (HV) Datasheet (EMEA, EN)Product questions
Can this 13.10 kWh tower sustain a domestic heat pump through an entire winter night?
Yes, for standard 4–8 kW thermal heat pumps under typical winter conditions. A modern modulating air-to-water heat pump draws approx. 1.2 kW to 1.8 kW electrical power under standard winter cycling. With 11.80 kWh of usable energy, the tower comfortably powers 6 to 8 hours of active compressor runtime alongside household baseline loads (refrigeration, lighting, Wi-Fi), shielding the home from expensive peak nighttime grid electricity.
Can I add a 5th module to this tower in the future to reach 16.38 kWh?
Yes. Stacks up to 5 modules total on the same base. The PCU base included with this kit supports up to 5 modules. To expand, simply turn off the DC switch, place a fifth LX F3.3-H module on top of the column, re-anchor the wall brackets, and power on. The system will auto-calibrate to 16.38 kWh / 512 V.
What is the total assembled height and weight of the 4-module tower?
1,015 mm height; 201.0 kg total weight. * Total Height: 1,015 mm (approx. 40 inches) on its leveling pedestal. * Total Weight: 201 kg (approx. 443 lbs). * Structural Recommendation: Use the included heavy-duty wall-mounting bracket to anchor the top of the 1-meter column against the wall for seismic stability.
System components
Required components
GoodWe GW10K-ET hybrid inverter (one of 8 listed models)
Item number: DLK-GOODWE-GW10KET
The product's own compatibility data lists 8 paired inverters, GW5K-ET through GW30K-ET (both the ET 5-10 kW and ET 15-30 kW families); GW10K-ET is shown as a representative mid-range example, not the only option.
Recommended components
GoodWe EzManager3000
Item number: DLK-GOODWE-EZMANAGER3000
Single-site home EMS for the paired hybrid inverter plus EV charger / heat pump / Shelly device control.
Approved pairings
GoodWe GW10K-BTItem number DLK-GOODWE-GW10KBTGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW5K-BTItem number DLK-GOODWE-GW5KBTGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW8K-BTItem number DLK-GOODWE-GW8KBTGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW15K-ETItem number DLK-GOODWE-GW15KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW20K-ETItem number DLK-GOODWE-GW20KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe Lynx D 20 kWh + GW20K-ETItem number DLK-GOODWE-LYNXD20KWHGW20KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW25K-ETItem number DLK-GOODWE-GW25KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe Lynx D 25 kWh + GW25K-ETItem number DLK-GOODWE-LYNXD25KWHGW25KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW29.9K-ETItem number DLK-GOODWE-GW299KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW30K-ETItem number DLK-GOODWE-GW30KETGoodWe requires ARM 07 and DSP 06 or higher on the ET 15-30 kW for the Lynx Home F.
GoodWe GW10K-ETItem number DLK-GOODWE-GW10KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW5K-ETItem number DLK-GOODWE-GW5KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW6.5K-ETItem number DLK-GOODWE-GW65KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
GoodWe GW8K-ETItem number DLK-GOODWE-GW8KETGoodWe requires ARM 25 and DSP 09 or higher on the ET/BT for the Lynx Home F.
