GoodWe Lynx D 25 kWh (5 x LX D5.0-10)
A 25 kWh GoodWe Lynx D battery tower: 5 x LX D5.0-10 modules.
- 5 kWh usable per module, 100% depth of discharge, IP66 enclosure, CAN communication to the BMS.
- Scales from a single 5 kWh module to 8 modules (40 kWh) across up to 2 parallel battery groups.
- GoodWe lists the Lynx D against the ET 5-10 kW range, the ET 15-30 kW range and the BT retrofit range — not against the ET 40-50, ET 75-100 or ETC/BTC C&I tiers.
- 5 kWh
- Usable energy
- Charge: 435; Discharge: 380 V
- Nominal voltage
- LFP (LiFePO4)
- Cell chemistry
- IP66
- Ingress protection
- Manufacturer
- GoodWe
- Model code
- LX D5.0-10
- Item no.
- DLK-GOODWE-LYNXD25KWH
- Delivery
- Delivery included in your Proforma
Plan with LX D5.0-10
New system, extension or replacement? Linker Advisor starts from this article and asks only for what is still open — existing model, quantity, postcode, installation date.
Figures transcribed from the manufacturer datasheet on file. Confirm your grid code and configuration with our engineers before ordering.
- GoodWe · SAJ · Pylontech · EcoFlow · Chint paired from the maker’s own lists
- Datasheets on file for every item
- Within 24 h engineering response
- MOQ 1 unit · EU delivery
- Engineering-checked configurations
Size it to the load. Grow it later.
25 kWh per stack today; add modules when the load grows instead of guessing on day one.
Inspect it before you spec it.
Official renders, installation photos and system panels for this model line.
Official manufacturer render.
Specifications
Every value exactly as published in the official LX D5.0-10 documentation.
Documents
Complete the system
Balance-of-system and accessories paired with this model. Every pairing follows the manufacturer's official compatibility list.
GoodWe GM330 CT meter
- [1]GoodWe GM330 CT meter
GoodWe GW10K-ET hybrid inverter (ET 5-10 kW range)
GoodWe GW20K-ET hybrid inverter (ET 15-30 kW range)
- [1]GoodWe GW10K-ET hybrid inverter (ET 5-10 kW range)
- [2]GoodWe GW20K-ET hybrid inverter (ET 15-30 kW range)
Additional GoodWe LX D5.0-10 module
- [1]Additional GoodWe LX D5.0-10 module
What this unit is approved to run with.
Every pairing below traces to a manufacturer compatibility list, by document version and date. A pairing only one maker lists is marked; we quote it, an engineer confirms it.
GoodWe GW10K-BT
Item no. DLK-GOODWE-GW10KBT On GoodWe's compatibility list
GoodWe GW10K-BT
Item no. DLK-GOODWE-GW10KBT On GoodWe's compatibility list
GoodWe GW10K-BT
Item no. DLK-GOODWE-GW10KBT On GoodWe's compatibility list
GoodWe GW10K-BT
Item no. DLK-GOODWE-GW10KBT On GoodWe's compatibility list
GoodWe GW10K-BT
Item no. DLK-GOODWE-GW10KBT On GoodWe's compatibility list
GoodWe GW5K-BT
Item no. DLK-GOODWE-GW5KBT On GoodWe's compatibility list
GoodWe GW5K-BT
Item no. DLK-GOODWE-GW5KBT On GoodWe's compatibility list
GoodWe GW5K-BT
Item no. DLK-GOODWE-GW5KBT On GoodWe's compatibility list
Pick the rating
GoodWe family. Same engineering, different size.
Every figure comes straight from the manufacturer's official datasheet.
Configuration 3
No. GoodWe publishes one module, the LX D5.0-10 with 5 kWh usable; the 10, 15, 20 and 25 kWh listings are de-linker supply bundles of 2, 3, 4 or 5 of that same module.
- Bundle contents: 10 kWh = 2 x LX D5.0-10 (104 kg), 15 kWh = 3 modules (156 kg), 20 kWh = 4 modules (208 kg), 25 kWh = 5 modules (260 kg).
- Same hardware: every bundle ships the identical module, so GoodWe's per-module datasheet figures apply unchanged.
- Packages: ready-made tower plus GW20K-ET or GW25K-ET inverter combinations are listed as separate items for one-line quoting.
GoodWe lists the Lynx D against its ET 5-10 kW range, the ET 15-30 kW range and the BT retrofit range.
- Named models in the product data: GW5K-ET, GW6.5K-ET, GW8K-ET, GW10K-ET, GW15K-ET and GW20K-ET.
- Firmware condition: GoodWe's pairing notes carry inverter firmware ARM 28 / DSP 12 or higher on the ET 5-10 kW and ET 15-30 kW pairings.
- Not cleared: the ET 40-50, ET 75-100 and ETC/BTC commercial tiers are not on GoodWe's Lynx D list.
- Electrical window: 320 to 480 V output with CAN communication to the inverter.
Yes. GoodWe rates the Lynx D at a maximum of 2 battery groups, up to 4 modules per group, 8 modules and 40 kWh in total.
- Headroom per bundle: the 10 kWh bundle (2 modules) leaves room for 6 more modules and the 25 kWh bundle (5 modules) for 3 more, up to the 40 kWh system maximum.
- Mixed ages: GoodWe states the Lynx D packs support mixing old and new modules, so a later extension does not require matching production batches.
- Steps: capacity grows in 5 kWh usable steps of one LX D5.0-10 module.
Installation & wiring 1
Lynx D modules floor-stack into a tower or wall-mount, with an IP66-rated enclosure.
- Handling: each module is 52 kg at 700 x 380 x 170 mm; a 20 kWh tower totals 208 kg, so check floor loading and plan two-person lifts.
- Temperature: discharge from -20 to +53 C and charge from 0 to +53 C per GoodWe.
- Environment: 0 to 95% relative humidity, altitude up to 4000 m.
- Metering: plan a GoodWe GM330 CT meter at the grid point; it is required on GoodWe ET/BT installations for export limiting and self-consumption metering.
Availability & compliance 1
GoodWe lists safety, EMC and transport certification for the LX D5.0-10 module, and every bundle ships that same certified module.
- Safety: IEC 62619, IEC 60730, VDE 2510-50, CE, CEC.
- EMC: CE and RCM.
- Transport: UN38.3.
- Grid connection: grid-code certification sits with the paired ET or BT inverter, not with the battery; confirm the certificate set required by your grid operator with the quote.
Send the project. Hear from an engineer within 24 hours.
Loads, tariff, site constraints - our engineers reply with a compatibility check and a sizing recommendation.
Contact project supportOr write to linker01@de-linker.com — attach your load profile if you have one.