GoodWe GW61.4-BAT-AC-G10
GoodWe GW61.4-BAT-AC-G10 is an outdoor high-voltage battery cabinet with 61.4 kWh nominal energy, paired with the GoodWe ET hybrid inverters and the STS box.
- 10.24 kWh LFP packs, up to 4 units stackable per inverter — GoodWe's signed compatibility statement (2025-04-07) confirms the full stack (up to 450 kWh) against the ET 80-100 kW trio specifically.
- Also listed against the ET 15-30 kW range (ARM 13+ firmware) and the ET 40-50 kW range, though GoodWe notes the smaller GW61.4-BAT-AC-G10 cannot reach full inverter power when paired with the ET 40-50 kW tier.
- Not listed against the ETC/BTC C&I cabinet range or the BT retrofit range — those pair with Lynx C or Lynx D instead.
- 60 kWh
- Usable energy
- 10.24 kWh
- Nominal energy
- 307.2 V
- Nominal voltage
- LFP (LiFePO4)
- Cell chemistry
- Manufacturer
- GoodWe
- Model code
- GW61.4-BAT-AC-G10
- Item no.
- DLK-GOODWE-GW614BATACG10
- Delivery
- Delivery included in your Proforma
Plan with GW61.4-BAT-AC-G10
New system, extension or replacement? Linker Advisor starts from this article and asks only for what is still open — existing model, quantity, postcode, installation date.
Figures transcribed from the manufacturer datasheet on file. Confirm your grid code and configuration with our engineers before ordering.
- GoodWe · SAJ · Pylontech · EcoFlow · Chint paired from the maker’s own lists
- Datasheets on file for every item
- Within 24 h engineering response
- MOQ 1 unit · EU delivery
- Engineering-checked configurations
Numbers that survive the bank's site audit.
Every figure below comes from the manufacturer datasheet on file — the same document your lender's technical advisor will request.
Rated capacity (Ah)
Nominal energy (kWh)
Usable energy (kWh)
GW61.4-BAT-AC-G10, specified from the datasheet.
Every value on this page is transcribed from the manufacturer documentation on file.
Energy
61.4 kWh nominal, 60 kWh usable, 6 packs of 10.24 kWh, 314 Ah LFP cells.
Inspect it before you spec it.
Official renders, installation photos and system panels for this model line.
Manufacturer product image from the official datasheet.
GoodWe BAT-C outdoor cabinet, official render from the GoodWe datasheet
Specifications
Every value exactly as published in the official GW61.4-BAT-AC-G10 documentation.
Documents
Complete the system
Balance-of-system and accessories paired with this model. Every pairing follows the manufacturer's official compatibility list.
GoodWe GM3000 three-phase meter
- [1]GoodWe GM3000 three-phase meter
GoodWe GW80K-ET-G10 hybrid inverter (ET 80-100 kW range)
- [1]GoodWe GW80K-ET-G10 hybrid inverter (ET 80-100 kW range)
GoodWe GW20K-ET hybrid inverter (ET 15-30 kW range)
- [1]GoodWe GW20K-ET hybrid inverter (ET 15-30 kW range)
What this unit is approved to run with.
Every pairing below traces to a manufacturer compatibility list, by document version and date. A pairing only one maker lists is marked; we quote it, an engineer confirms it.
GoodWe GW15K-ET
Item no. DLK-GOODWE-GW15KET On GoodWe's compatibility list
GoodWe GW20K-ET
Item no. DLK-GOODWE-GW20KET On GoodWe's compatibility list
GoodWe GW25K-ET
Item no. DLK-GOODWE-GW25KET On GoodWe's compatibility list
GoodWe GW29.9K-ET
Item no. DLK-GOODWE-GW299KET On GoodWe's compatibility list
GoodWe GW30K-ET
Item no. DLK-GOODWE-GW30KET On GoodWe's compatibility list
GoodWe GW40K-ET-10
Item no. DLK-GOODWE-GW40KET10 On GoodWe's compatibility list
Pick the rating
GoodWe family. Same engineering, different size.
Every figure comes straight from the manufacturer's official datasheet.
Configuration 3
The BAT-C air-conditioned cabinets pair with GoodWe ET hybrid inverters together with the STS box; they are not listed against the ETC / BTC or BT ranges.
- ET 80-100 kW: GoodWe's signed compatibility statement of 2025-04-07 confirms the full four-unit stack, up to 450 kWh, against this tier.
- ET 15-30 kW: also listed, with ARM firmware 13 or later required on the inverter.
- ET 40-50 kW: listed as well, but GoodWe notes the smaller GW61.4-BAT-AC-G10 cannot reach full inverter power on this tier.
- Not compatible: the ETC / BTC C&I range and the BT retrofit range pair with Lynx C or Lynx D instead.
Choose 60 or 110 kWh usable per cabinet, then parallel up to four cabinets on one system.
- GW61.4-BAT-AC-G10: 6 packs of 10.24 kWh, 61.4 kWh nominal, 60 kWh usable, 307.2 V nominal.
- GW112.6-BAT-AC-G10: 11 packs of the same 10.24 kWh pack, 112.6 kWh nominal, 110 kWh usable, 563.2 V nominal.
- Parallel limit: up to 4 clusters, 450.4 kWh installed; an ET 80-100 kW inverter carries up to four of the 112.6 kWh units.
- Same enclosure: both sizes share the 1055 x 2000 x 1055 mm cabinet; weight is below 950 kg and below 1400 kg respectively.
GoodWe rates both sizes at 0.9C continuous charging and 1.1C continuous discharging.
- GW61.4-BAT-AC-G10: 55.2 kW in, 67.5 kW out.
- GW112.6-BAT-AC-G10: 101.3 kW in, 123.9 kW out.
- Current limits: 180 A maximum charging and 220 A maximum discharging on both models.
- Practical note: time at maximum C-rate depends on state of charge and cell temperature; plan sustained duty around the continuous ratings, not momentary peaks.
Installation & wiring 1
Yes. The BAT-C cabinet is designed for outdoor placement at the installation.
- Enclosure: IP55 with C4 anti-corrosion class as standard and an optional C5-M upgrade for coastal or industrial air.
- Thermal: a built-in air conditioner holds the packs across a -20 to +55 C ambient range, up to 4000 m altitude.
- Fire safety: aerosol suppression equipment at pack and cabinet level ships as standard.
- Wiring: communication to the inverter is CAN, with RS485 optional; plan the foundation for a 1055 x 2000 x 1055 mm cabinet at up to 1400 kg for the 112.6 kWh size.
Operation & warranty 1
GoodWe rates the BAT-C cabinets at 6000 cycles and 96 percent round-trip efficiency under stated test conditions.
- Cycle basis: 6000 cycles at 25 C, 0.5C charge and discharge, 90 percent depth of discharge, to 70 percent end of life.
- Efficiency basis: 96 percent round trip at 100 percent depth of discharge, 0.2C and 25 C.
- Usable vs nominal: plan the business case on the usable figures, 60 kWh and 110 kWh, not the 61.4 and 112.6 kWh nominal ratings.
- Cell chemistry: LFP in 10.24 kWh packs on both sizes.
Send the project. Hear from an engineer within 24 hours.
Loads, tariff, site constraints - our engineers reply with a compatibility check and a sizing recommendation.
Contact project supportOr write to linker01@de-linker.com — attach your load profile if you have one.