Description
One vertical system, sized by module count.
Pylontech FH3X-6K-HY-1P is the 6 kW single-phase Force H3X hybrid unit. The specification lists one to four FH10050 modules, 6,000 W nominal active power to grid, a 6,000 VA backup rating, and 9.6 kW maximum PV input through two MPPTs.
Build the tower to the job
the 6K-HY-1P is specified with one to four FH10050 modules, for 5.12 to 20.48 kWh nominal capacity.
The 6K column gives 6,000 W nominal active output and 26.1 A maximum nominal continuous current to grid; current drawn from the grid has a separate 39.1 A rating.
Plan the PV side around two MPPTs, 16 A maximum current per tracker and 9.6 kW maximum PV power.
For protected circuits, the documented backup rating is 6,000 VA with on/off-grid switching of no more than 10 ms; the actual loads still need an electrical design.
More product details
The specification pairs FH3X-6K-HY-1P with one to four FH10050 modules. Height varies from 665 to 1,175 mm; the footprint is 540 × 350 mm.
- One to four modules provide 5.12 to 20.48 kWh nominal capacity.
- With one module, maximum charge and discharge power is 2.5 kW.
- The 6K model is specified for a 230 V single-phase connection.
Force H3X
Compare different models
Scroll sideways to compare every model.
Two trackers for the 6K PV design
The 6K column specifies two MPPTs, one string per tracker, 16 A maximum operating current and 25 A short-circuit current per MPPT. Check each proposed string against those limits and the 80–550 V tracking range.
Up to 9.6 kW PV input
The 6K-HY-1P data column gives 9.6 kW maximum PV power and 80 V start-up voltage.
A tower that changes with module count
With one to four FH10050 modules, nominal capacity runs from 5.12 to 20.48 kWh. The documented height runs from 665 to 1,175 mm on a 540 × 350 mm footprint.
Backup is a separate output rating
For this model, the backup output is rated 6,000 VA and 26.1 A. A single battery module limits maximum charge and discharge power to 2.5 kW.
Technical data
A single-phase H3X system sized by its FH10050 modules.
6 kW single-phase hybrid with a one-to-four-module stack.
The FH3X-6K-HY-1P is specified for one to four FH10050 modules. The 6K column gives 6,000 W nominal active output, 26.1 A maximum nominal continuous current to grid, 9.6 kW maximum PV power and two 16 A MPPTs. With one module, maximum charge and discharge power is 2.5 kW.
- Nominal grid output
- 6,000 W
- FH10050 modules
- 1–4
- Maximum PV input
- 9.6 kW
- Max. continuous current to grid
- 26.1 A
System
- System architecture
- FH3X-6K-HY-1P with one to four FH10050 modules.
- System nominal power
- 6 kW (FH3X-6K-HY-1P).Single-phase family: 3.6 / 5 / 6 / 8 kW
- System rated capacity
- 5.12 / 10.24 / 15.36 / 20.48 kWh (1-4 x FH10050)
- Ingress protection
- IP65
- Dimensions (W/D, height by module count)
- 540 × 350 mm; 665 / 835 / 1005 / 1175 mm (1–4 FH10050)
- Weight
- 77 / 116 / 155 / 194 kg (1–4 FH10050)
PV Input
- Maximum PV power
- 9.6 kW (6K). Single-phase family: 5.7 / 8 / 9.6 / 12.8 kW
- Maximum DC input voltage
- 600 V
- Start-up voltage
- 80 V
- MPPT voltage range
- 80-550 V (full-load range 190-520 V)
- MPP trackers / strings
- 2 MPPT (3.6–6 kW); 3 MPPT (8 kW); 1 string / MPPT
- Max. input current / short-circuit current per MPPT
- 16 A / 25 A
- Surge protection
- Type II (DC and AC)
AC Output & Backup
- Grid connection
- 1/N/PE a.c. 230 V, 50/60 Hz (single-phase)
- Nominal active power to grid
- 6 kW (6K). Single-phase family: 3600 / 5000 / 6000 / 8 kW
- Backup (off-grid) rated apparent power
- 6 kVA (6K); max. continuous backup current 26.1 A
- Peak off-grid power (60 s)
- 6.2 kVA (60 s)
- On/off-grid switching time
- <= 10 ms
- THDi
- < 3%
Battery (FH10050 modules)
- Module capacity
- 5.12 kWh per FH10050 module
- Max. continuous charge/discharge current
- 40 A (single-phase table)
- Max. charging power
- 2.5 kW (1); 8 kW (2–4)
- Max. discharging power
- 2.5 kW (1); 6 kW (2–4, 6K)
- Cycle life
- 8,000+ cycles
Efficiency, Environment & Communication
- Maximum / European efficiency
- 98% / 97.5%
- Operating temperature range
- −10–55 °C
- Humidity / altitude
- 0-100% RH / < 4000 m
- Noise / standby consumption / cooling
- < 29 dB @ 1 m; < 15 W standby (night); natural cooling
- Communication
- WiFi / WLAN / Bluetooth
- Protection features
- EPO installedType II surge protection · standard-compliance list includes AFCI to IEC 63027
Project fit
Where this model fits.
Scenarios that show which projects the Pylontech Force H3X FH3X-6K-HY-1P – Single-Phase Hybrid Inverter belongs in, and what to verify before quoting.
A single-phase 230 V system with a sized FH10050 stack
A project calls for the FH3X-6K-HY-1P on a 230 V single-phase connection.
Choose one to four FH10050 modules for 5.12 to 20.48 kWh nominal capacity, then check PV strings, grid connection and protected loads against the 6K column.
- Fit230 V single phase, one to four FH10050 modules and a maximum 9.6 kW PV input.
- Confirm the planned module count; one module limits charge and discharge power to 2.5 kW.
Documents
Pylontech Force H3X Hybrid Datasheet (EN)Product questions
How many FH10050 modules can I plan with the FH3X-6K-HY-1P?
The single-phase 6K model is specified with one to four FH10050 modules, giving 5.12 to 20.48 kWh nominal capacity. With one module, maximum charging and discharging power is 2.5 kW; check the planned load against that limit before ordering.
System components
Required components
Pylontech FH10050 battery module (5.12 kWh)
Item number: DLK-PYLONTECH-FH10050
The H3X specification names FH10050 for this single-phase 6K model. One module gives 5.12 kWh nominal capacity and limits maximum charging and discharging power to 2.5 kW.
Recommended components
Additional FH10050 modules (up to 4 per tower)
Item number: DLK-PYLONTECH-FH10050
The specification permits one to four FH10050 modules on the single-phase model, for up to 20.48 kWh nominal capacity.