SAJ AC011K-AE-35 (11 kW three-phase EV wallbox, tethered Type 2)
Description
Driving on 100% self-generated rooftop solar energy.
SAJ AC7000-AE-35 is a 7 kW smart single-phase residential EV charger with an integrated 7-meter tethered Type 2 cable, delivering up to 32 A fast charging engineered to integrate natively with SAJ solar-plus-storage systems.
Full 7 kW Single-Phase Fast Charging (32 A)
Maximizes standard domestic single-phase charging speed, adding up to 35–45 km of range per hour.
Tethered 7 m Ergonomic Type 2 Cable
Always ready on the driveway with an ergonomic, weather-sealed plug, eliminating the hassle of unpacking cables from the car boot.
100% Dynamic Solar Surplus Charging
Modulates charging power in real time to match excess rooftop solar, driving on zero-cost electricity.
Integrated Type A + 6 mA DC RCD Protection
Built-in protection eliminates the need for expensive external Type B RCD breakers in the distribution box.
More product details
Uncoordinated EV charging pulls expensive peak electricity from the grid. The AC7000-AE-35 communicates with the SAJ smart meter, routing only surplus solar power into the car battery.
- Solar-Only Mode: Charges exclusively when rooftop PV generation exceeds household baseline consumption.
- Fast-Charge Mode: Draws combined solar and grid power at full 32 A (7 kW) when rapid turnaround is required.
- Off-Peak Scheduled Mode: Automatically charges during cheap overnight dynamic tariff windows.
SAJ Caro
Compare different models
Scroll sideways to compare every model.
2 models
Communication
OCPP1.6 Json; RS485 Support
OCPP1.6 Json; RS485 Support
Ingress protection
IP65 (cable)
IP65 (cable)
Integrated protection with unified cloud energy management.
Featuring integrated 6 mA DC fault current protection and RFID authorization, the charger provides commercial-grade safety and simple multi-user management. Built-in Type A + 6 mA DC residual current sensor eliminates expensive external Type B RCD breakers. Dynamic load balancing throttles EV charging automatically if household appliances spike to prevent main fuse trips. Full real-time charging telemetry, kWh totals, and cost analysis tracked via SAJ eSolar mobile portal.
Seven metres of Type 2 on the unit.
The tethered cable removes a separate lead from the first install conversation.
OCPP and RFID ready.
OCPP 1.6 JSON plus RS485, with Mifare RFID and plug-to-charge / app start options.
Technical data
Intelligent home EV charging engineered for seamless solar-plus-storage integration.
7 kW / 32 A single-phase smart EV wallbox with tethered 7 m cable and solar tracking.
Designed to integrate directly with SAJ residential solar and storage systems, the AC7000-AE-35 delivers up to 7,000 W (32 A) of smart single-phase vehicle charging. Its intelligent solar tracking dynamically modulates charging power to match real-time rooftop generation, ensuring 100% green solar-powered driving while protecting the household from main breaker overloads.
- Single-Phase Charging
- 7.0 kW
- Tethered Cable
- 7.0 m
- Green Solar Tracking
- 100%
- Integrated RCD
- 6 mA DC
Charging
- Rated output
- 7 kW
- Rated current
- 32 A
- Rated voltage
- 230 V AC
- Phases
- 1P+N+PE
- Connector
- Type 2
Cable and interface
- Cable
- 7 m
- Start modes
- Plug to charge / App / RFID card
- RFID reader
- Mifare ISO/IEC14443 A
- Communication
- OCPP1.6 Json; RS485 Support
Protection
- Electrical protection
- Over current protection, Residual current protection, Surge protection, Over/Under voltage protection, Over/Under frequency protection, Over temperature protection
- Residual current device
- 30mA Type A + 6mA DC
- Ingress protection
- IP65 (cable)
- Impact protection
- IK08
Installation and enclosure
- Installation
- Wall-mount/Pole-mount (optional)
- Enclosure material
- PC
- Status indication
- Green/Yellow/Red
Environment
- Operating temperature
- -30 to 50 °C
- Operating humidity
- 5% to 90%
- Operating altitude
- <2000 m
Compliance
- Certification
- CE/CB/RoHs
- Certification standards
- EN IEC 61851-1:2019, IEC61851-1:2017, IEC61851-21-2:2021
- Frequency
- 50/60 Hz
- Warranty
- Three years
Project fit
Where this model fits.
Scenarios that show which projects the SAJ AC7000-AE-35 (7 kW single-phase EV wallbox, tethered Type 2) belongs in, what to verify before quoting, and when another model is the better pick.
Project scenario
Single-Phase Residential Properties (5–8 kWp Solar)
Single-family homes with standard 230 V single-phase grid connections seeking fast, smart domestic EV charging.
Delivers the maximum allowable single-phase charging speed (32 A / 7 kW) with native SAJ solar surplus tracking.
What Linker confirms with you
- Confirm this model against the adjacent rating in the same family
Documents
AC7000AC011K datasheet en-1 SAJ Caro Series Wallbox EV Charger user manual (EN, AC7000-AE-35 + AC011K-AE-35)Product questions
Does this charger require an external Type B RCD in the electrical panel?
No. Built-in Type A + 6 mA DC leakage protection is standard. The AC7000-AE-35 integrates internal Type A residual current detection plus 6 mA DC fault protection, fully satisfying European standard IEC 62955. A standard, inexpensive Type A RCD in the main distribution box is all that is required.
What cable and breaker sizing are required for installation?
40 A single-phase MCB; minimum 6 mm² copper conductors. For a continuous 32 A load, install a 1-pole 40 A circuit breaker (Type B or C) paired with 3 × 6 mm² copper cable (or 10 mm² for cable runs over 25 meters).
Related products