GoodWe GM1000D (single-phase smart meter, 2 CT)
GoodWe GM1000D is the single-phase member of GoodWe's smart meter range, with 2 current transformers and RS485 to the inverter.
- Single-phase, 2 current transformers at a 120 A:40 mA ratio — two circuits from one meter.
- Class 1 active energy, Class 2 reactive, Class 1 voltage and current — accurate enough for export control rather than indication only.
- RS485 to 1000 m, so the meter sits at the point of connection and the inverter does not have to.
- Two DIN modules, 110/230 Vac at 0.88-1.1 Un, under 3 W, -25 to +60 °C, IP20 for inside a distribution board.
- IP20
- Ingress protection
- Manufacturer
- GoodWe
- Model code
- GM1000D
- Item no.
- DLK-GOODWE-GM1000D
- Delivery
- Delivery to Germany · EUR 14.90 at checkout
Plan with GM1000D
New system, extension or replacement? Linker Advisor starts from this article and asks only for what is still open — existing model, quantity, postcode, installation date.
Figures transcribed from the manufacturer datasheet on file. Confirm your grid code and configuration with our engineers before ordering.
- GoodWe · SAJ · Pylontech · EcoFlow · Chint paired from the maker’s own lists
- Datasheets on file for every item
- Within 24 h engineering response
- MOQ 1 unit · EU delivery
- Engineering-checked configurations
GM1000D, specified from the datasheet.
Every value on this page is transcribed from the manufacturer documentation on file.
Inspect it before you spec it.
Official renders, installation photos and system panels for this model line.
GoodWe GM series DIN-rail smart meter.
Specifications
Every value exactly as published in the official GM1000D documentation.
Documents
Pick the rating
GoodWe GM family. Same engineering, different size.
Every figure comes straight from the manufacturer's official datasheet.
Selection 2
The number of current transformers, and nothing else. Every other row on GoodWe's datasheet is identical.
- GM1000: one CT — one circuit measured.
- GM1000D: two CTs — two circuits from one meter.
- Neither is a better version of the other. Pick by how many circuits you need to see: a plain PV feed takes the GM1000, a site that also meters a charger or a sub-circuit takes the D.
No — this is the single-phase meter. For three-phase, GoodWe's own MODEL row gives the GM3000, which de-linker also sells.
- Single-phase: GM1000 or GM1000D (this range).
- Three-phase: GM3000.
- All three are SEMS-ecosystem meters on RS485; the difference is what they can measure.
Installation & wiring 1
Two DIN modules in the distribution board, with the CTs around the conductor at the point of connection.
- CT ratio is 120 A:40 mA, 2 supplied against the meter.
- RS485 back to the inverter, good for 1000 m, so the meter goes where the measurement has to happen rather than next to the inverter.
- IP20: it belongs inside an enclosure, not on a wall.
Delivery 1
Derived from de-linker's own published GoodWe meter prices.
- Below the published GM3000 at 140, because a single-phase meter measures one element rather than three.
- The two-CT premium mirrors the shop's own published direct-connect to CT meter step (Chint DTSU666 at 55 against DTSU666-CT at 70).
- Parcel delivery, B2B net, confirmed on the quote.
Send the project. Hear from an engineer within 24 hours.
Loads, tariff, site constraints - our engineers reply with a compatibility check and a sizing recommendation.
Contact project supportOr write to linker01@de-linker.com — attach your load profile if you have one.