Description
Plan 16.1 kWh in one Lynx A G4 enclosure
GW16.1-BAT-LV-G10 is a 16.1 kWh rated Lynx A G4 enclosure. Usable energy is at least 14.9 kWh under a 100% DoD (cell 2.87–3.61 V), 0.2P charge/discharge, 25 ± 2 °C beginning-of-life test. At no more than 122 kg and ≤470 × 895 × 245 mm without its base, the wall or floor location needs room and support.
Plan 16.1 kWh in one Lynx A G4 enclosure
The enclosure weighs ≤122 kg and measures ≤470 × 895 × 245 mm without base; it mounts on the wall or on the floor. At 51.2 V nominal, maximum input power is 8 kW and output power is 10 kW. Power can derate with temperature and state of charge.
Check the mounting position before ordering
The enclosure weighs ≤122 kg and measures ≤470 × 895 × 245 mm without base; it mounts on the wall or on the floor.
Power for the low-voltage path
At 51.2 V nominal, the model lists maximum input power of 8 kW and output power of 10 kW. Power can derate with temperature and state of charge.
Technical data
Model figures
16.1 kWh rated · ≤122 kg
Usable energy is ≥14.9 kWh under 100% DoD (cell 2.87–3.61 V), 0.2P charge/discharge and 25 ± 2 °C at beginning of life. The cabinet is rated at 51.2 V nominal and supports wall or floor mounting.
Energy and electrical
- Rated energy
- 16.1 kWh
- Usable energy
- ≥14.9 kWh100% DoD (cell 2.87–3.61 V), 0.2P charge/discharge, 25 ± 2 °C, beginning of life
- Nominal voltage
- 51.2 V
- Voltage range
- 45.92–57.76 V
- Maximum input power
- 8 kW
- Maximum output power
- 10 kW
Enclosure and installation
- Weight
- ≤122 kg
- Dimensions without base W × H × D
- ≤470 × 895 × 245 mm
- Mounting
- Wall / floor
- Ingress protection
- IP65
- Battery chemistry
- LFP (LiFePO4)
Project fit
Where this model fits.
Scenarios that show which projects the GoodWe Lynx Home A G4 GW16.1-BAT-LV-G10 (16.1 kWh LFP battery) belongs in, and what to verify before ordering.
Plan 16.1 kWh in one Lynx A G4 enclosure
A low-voltage store with 16.1 kWh rated energy is planned, while wall support and the delivery route still need checking.
GW16.1-BAT-LV-G10 weighs ≤122 kg, and its enclosure measures ≤470 × 895 × 245 mm without base. Wall or floor mounting is specified.
- Plan wall or floor support for ≤122 kg and the enclosure size of ≤470 × 895 × 245 mm without base.
- Use 51.2 V nominal and 45.92–57.76 V when planning the battery interface.
- Check that the chosen hybrid inverter is one of the ET LV 5.0–20 kW models that the Solutions Manual lists for this battery.
Documents
GoodWe Lynx A G4 Series 16 kWh Datasheet (EN) GoodWe Residential Smart Inverter ET LV 5.0–20 kW Solutions Manual (EN)Product questions
What load and dimensions should the wall or floor location allow?
The enclosure weighs ≤122 kg and measures ≤470 × 895 × 245 mm without base. It mounts on the wall or on the floor, so check access and support against those figures.